Sample letter printed, sprayed with laser cut stencils onto plywood substraight. This letter is prepared for Coach Company in NYC as evaluation of potential possibilities to print pearl sparkling and reflecting lettering for upcoming project. This can be used as nice idea for the sign. To do this letter 3 stencils and 4 types of spray paint was needed.

This rule sign was printed directly to a metal aluminum panel with our flatbed UV printer. Multiple layers of ink was added in top of percolated aluminum sheet to ensure maximum durability of the sign in outdoor environment. Sign is fairly large, metal is 3x2’ and its real aluminum metal 3/8” so its quite heavy.  Aluminum was brushed before printing to add nice texture and prevent any reflection so sign is very easy to read. Flatbed UV printing is a good add on to the LaserCutZ laser engraving services. Our UV printer can easily handle 4x8’ and 8x10’ larger size architectural and sign printing needs. We can print full color on any type

Did you know that typical constriction bricks can be laser engraved? There few ways how bicks can be laser engraved. If Co2 laser is used, top later of clay will “evaporate” and artwork or text will recess down into the brick so deep channel is formed. On another hand if fiber laser is used top layer of the brick will change color to a darker one showing artwork like it was printed. Brick shows in this project was done for mall in Manhattan. Very often bricks or foot plates are engraved for fundraising campaigns with donors names, sometime bricks are used for memorial purposes.

This is a pin mount, elevated florescent acrylic sign.  When light hits the surface of the letters it escapes from the sides making edge low in a more contrast red color. To catch more light those letters are offset form wall with clear acrylic pins.  Sign is fabricated and installed by LaserCutZ for a client on Wall St.

This is a section of structural iron beam. Beam is 2” thick and 24” high, weights around 500 lbs as result project was quite unusual and normally LaserCutZ does engraving on more light weight items. Interestingly enough this beam came right after we did fiber laser engraving for Brooklyn Navy Yards rail road rail which has same shape and same idea but is smaller and weights much less. This structural metal beam was fiber laser engraved for NYC local iron works company, to be used as a gift and sign for the project that they finished. Engraved letters in this metal go quite deep too as result job required lots of machine hours

Thor metal hammer is fiber laser engraved with a message on one side and flower symbol on another side. Engraving and decoration fully mimics original movie props style.  This Thor hammer will be placed inside Hummer SUV.

Dark oak wood laser engraved with a love story message and presented as a gift. Engraving is done with CO2 laser and color of the letters is controlled by laser beam power.  This engraved wood plaque is used as marriage proposal message.

This is another sample of crystal clear premium deep acrylic soap stamp which is LaserCutZ’s top of the line stamping product for soaps, pottery and ceramic products. This hard acrylic is laser cut to maximum depth and then polished to glossy surface. Premium stamps are most easiest to use and very reliable, material sticks less to them so stamping your logo is much more efficient than any other kind of stamp. Crystal clear premium stamps are invented by LaserCutZ and only available for order through our website.

Center screen of this door panel has smocked acrylic that LaserCutZ had laser engraved with Thor hammer logo. Screen has LED side lighting so logo shines up in blue when LEDs are turned on. This door panels is installed on Hummer H2

This is 4x3 feet MDF that is laminated with veneer and then stained and vanished. This wood panel is laser engraved with various liquor company’s logos along with logo of the retail store where panel will be installed.